Extech CO220 Desktop Indoor Air Quality CO2 Meter
Features
- Maintenance free NDIR (non-dispersive infrared) CO2 sensor
- Calculates Dew Point and Wet Bulb values
- Audible CO2 warning alarm when concentration level exceeds high or low user set point
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Extech Desktop Air Quality CO2 Monitor features a maintenance-free, non-dispersive infrared CO2 sensor that measures carbon dioxide concentration levels in indoor environments. Six facial icons indicate the air quality levels. An audible CO2 warning alarm is activated when the concentration level exceeds high or low user set points. The monitor also measures air temperature, humidity, dew point, and wet bulb. Up to 99 readings can be stored and recalled on the unit.
- Carbon Dioxide Range: 0 to 9,999ppm
- Carbon Dioxide Resolution: 1ppm
- Temperature Range: 14 to 140°F (-10 to 60°C
- Temperature Resolution: 0.1°F/°C
- Humidity Range: 0.1 to 99.9%RH
- Humidity Resolution: 0.1%RH
- Dew Point Range: -94 to 140°F (-70 to 60°C)
- Dew Point Resolution: 0.1°F/°C
- Wet Bulb Range: 14 to 140°F (-10 to 60°C)
- Wet Bulb Resolution: 0.1°F/°C
- Ips% Range: -1428 to 51 lps%*
- Ips% Resolution: 1%
- cfm/p Range: -30 to 1 cmf/p*
- cfm/p Resolution: 1 cfm/p
- Dimensions: 6.1 x 3.4 x 3.2" (155 x 87 x 81mm)
- Weight: 5.8oz (165g)
*Ranges are calculated from 0 to 1000ppm
- (1) CO2 monitor
- (1) AC adaptor
Select Options
In The News
Lake Erie Volunteer Science Network: Building Trust in Citizen Science Programs
Citizen science programs have popped up across the United States, focusing on connecting local communities with nearby water resources and building a trustworthy data pool over the sampling period. While commonly utilized as a means of ensuring that large watersheds or lake regions are adequately sampled, the credibility and success of such programs have been called into question. [caption id="attachment_38996" align="alignnone" width="940"] HRWC volunteers measure stream velocity across a subsection of Woods Creek, a tributary of the Huron River near Belleville, Michigan. Stream velocity measurements can be combined with water level measurements to calculate stream flow and chemical parameter loads.
Read More
Monitoring Lake Erie’s Eastern Basin: Building Long-Term Data and Real-Time Public Solutions
In the eastern basin of Lake Erie, off the coast of Dunkirk, New York, a data buoy collects valuable water quality, weather, and wave data that inform residents and regulatory groups of conditions on the water. Since 2011, Buffalo State University’s Great Lakes Center has maintained and operated the Dunkirk buoy with funding from the Great Lakes Observing System (GLOS) and field support from the NYSDEC Lake Erie Fisheries Research Unit. [caption id="attachment_38976" align="aligncenter" width="940"] The Dunkirk Buoy viewed from the research vessel after being deployed in early spring.
Read More
SonTek CastAway-CTD Meter Review
Lightweight and easy to use, the SonTek CastAway offers a convenient 3-in-1 solution for measuring conductivity, temperature, and depth profiles. At a 5 Hz sampling rate, the CastAway is designed for up to 1 m/s free-fall through the water column. With fast response and accurate conductivity, temperature, and depth measurements, the CastAway is ideal for thermocline and halocline profiling. The unit also reports salinity and speed of sound. [caption id="attachment_38732" align="alignnone" width="940"] Environmental scientist, Katelyn Kubasky, holding the SonTek CastAway in front of the pond at the Fondriest Center for Environmental Studies.
Read More
