Extech Heavy Duty CFM Metal Vane Anemometer
Features
- Withstands temperatures to 175°F (80°C) and airspeed to 78.3MPH (6890ft/min)
- Air flow displayed in 3 modes
- Large (9999 count) LCD display
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Extech Metal Vane Anemometer is a high-temperature instrument that can withstand temperatures up to 75°F (80°C) and airspeeds up to 78.3MPH (6890ft/min). Airflow is displayed in three modes: instantaneous value, up to 20 point average, and 2/3 flow value.
Design
Readings are clearly read on the large (9999 count) LCD display. The meter is capable of freezing the data on the screen through the data hold function, and recording or recalling minimum and maximum readings. It has a built-in RS-232 PC serial interface to communicate with the optional Data Acquisition Software.
- Air velocity (m/sec) range: 0.5 to 35m/s
- Air velocity (m/sec) resolution: 0.01m/s
- Air velocity (m/sec) basic accuracy: ±2%rdg
- Air velocity (ft/min) range: 100 to 7880ft/min
- Air velocity (ft/min) resolution: 1ft/min
- Air velocity (ft/min) basic accuracy: ±2%rdg
- Air velocity (MPH) range: 1.1 to 78.3MPH
- Air velocity (MPH) resolution: 0.1MPH
- Air velocity (MPH) basic accuracy: ±2%rdg
- Air velocity (knots) range: 1.0 to 68knots
- Air velocity (knots) resolution: 0.1knots
- Air velocity (knots) basic accuracy: ±2%rdg
- Air velocity (km/h) range: 1.8 to 126km/h
- Air velocity (km/h) resolution: 0.1km/h
- Air velocity (km/h) basic accuracy: ±2%rdg
- Temperature range: 32 to 175°F (0 to 80°C)
- Temperature resolution: 0.1°
- Temperature basic accuracy: ±1.5°F (±0.8°C)
- Aifrlow CFM range: 0 to 999,900CFM
- Airflow CFM resolution: 0.001
- Airflow CMM range: 0 to 999,900 CMM
- Airflow CMM resolution: 0.001
- Dimensions: 7 x2.9 x 1.3" (178 x 74 x 33mm)
- Weight: 1.6lbs (0.7kg)
- (1) Anemometer
- (1) Protective rubber holster with stand
- (1) Metal vane sensor with 3.9ft (120cm) cable
- (1) 9V battery
- (1) Case
Select Options
In The News
Cal Poly, San Luis Obispo Manages Monitoring Efforts in Morro Bay
California Polytechnic State University, San Luis Obispo (Cal Poly, SLO), has been monitoring Morro Bay for decades, and while the monitoring program has changed over the years, the dedication to monitoring the bay has remained the same. The project started in 2006 as a Packard Foundation-funded initiative to monitor water quality flowing in and out of Morro Bay. The goal at the time was to use the data collected to develop and inform an ecosystem-based management plan in collaboration with the Morro Bay National Estuary Program (MBNEP). Since the estuary was the focus at the time, researchers were monitoring water flowing into the estuary from Chorro Creek and Los Osos Creek.
Read More
Green Water in Green Bay: Using Data Buoys to Monitor the Southern Bay
While the bay of Green Bay has been referred to as the largest freshwater “estuary” in the world, the watershed hosts intensive agriculture and contributes one-third of Lake Michigan’s total phosphorus load. The Fox River flows into the bay, carrying excess nutrients largely the result of non-point source runoff from the watershed. With a history of deterioration extending well into the last century, the bay ecosystem suffered significant declines in water quality. This, in turn, stimulated major clean-up and ongoing restoration efforts to improve water quality. Tracking these changes is an important aspect of ecosystem management.
Read More
Cross-Border Sewage Contaminated Flows: Monitoring the Tijuana River
The Tijuana River runs across the US-Mexico boundary, flowing into and throughout southern California, carrying with it nutrients and contaminants throughout the estuary. In recent decades, the flows have been heavily polluted with untreated sewage from the City of Tijuana. The wastewater enters the greater Tijuana River estuary, impacting coastal communities and disrupting the natural environment. In order to better understand these cross-border flows, researchers out of San Diego University sought to monitor the waterway test the capabilities of in-situ sensors to measure the contaminated water. Natalie Mladenov and Trent Biggs were two of the researchers involved in the project, deploying a real-time monitoring system in May of 2021.
Read More
