Extech Mini Pocket Multimeter with Non-Contact Voltage Detector
Features
- Built-in flashlight
- Over-range and low battery indication
- Built-in storage clips for integrated test leads
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Extech Mini Pocket Multimeter with Non-Contact Voltage Detector is an 11-function meter that measures AC/DC voltage, AC/DC current and resistance, frequency and duty cycle.
Design
The meter has a built-in flashlight and storage clips for integrated test leads. The non-contact voltage detection identifies live circuits. The double molded housing provides extra protection. Applications include electrical repair, appliance repair, home wiring projects, and testing electrical systems on cars and boats.
- NC voltage range: 100 to 600VAC
- DC voltage range: 600V
- DC voltage maximum resolution: 0.1mV
- DC voltage basic accuracy: ±0.8%
- AC voltage range: 600V
- AC voltage maximum resolution: 1mV
- AC voltage basic accuracy: ±1.0%
- Resistance range: 40MΩ
- Resistance maximum resolution: 0.1Ω
- Resistance basic accuracy: ±0.8%
- DC current range: 200mA
- DC current maximum resolution: 0.1µA
- DC current basic accuracy: ±2.0%
- AC current range: 200mA
- AC current maximum resolution: 0.1µA
- AC current basic accuracy: ±2.5%
- Frequency range: 10kHz
- Frequency maximum resolution: 0.001Hz
- Frequency basic accuracy: ±1.0%
- Capacitance range: 200µF
- Capacitance maximum resolution: 0.001nF
- Capacitance basic accuracy: ±3.0%
- Duty cycle: yes
- Diode test: yes
- Continuity test: yes
- Dimensions: 4.72 x 2.2 x 01.6" (120 x 55 x 40mm)
- Weight: 5.12oz(145g)
- (1) Meter
- (1) Set of test leads
- (2) AAA Batteries
Select Options
In The News
Cal Poly, San Luis Obispo Manages Monitoring Efforts in Morro Bay
California Polytechnic State University, San Luis Obispo (Cal Poly, SLO), has been monitoring Morro Bay for decades, and while the monitoring program has changed over the years, the dedication to monitoring the bay has remained the same. The project started in 2006 as a Packard Foundation-funded initiative to monitor water quality flowing in and out of Morro Bay. The goal at the time was to use the data collected to develop and inform an ecosystem-based management plan in collaboration with the Morro Bay National Estuary Program (MBNEP). Since the estuary was the focus at the time, researchers were monitoring water flowing into the estuary from Chorro Creek and Los Osos Creek.
Read More
Green Water in Green Bay: Using Data Buoys to Monitor the Southern Bay
While the bay of Green Bay has been referred to as the largest freshwater “estuary” in the world, the watershed hosts intensive agriculture and contributes one-third of Lake Michigan’s total phosphorus load. The Fox River flows into the bay, carrying excess nutrients largely the result of non-point source runoff from the watershed. With a history of deterioration extending well into the last century, the bay ecosystem suffered significant declines in water quality. This, in turn, stimulated major clean-up and ongoing restoration efforts to improve water quality. Tracking these changes is an important aspect of ecosystem management.
Read More
Cross-Border Sewage Contaminated Flows: Monitoring the Tijuana River
The Tijuana River runs across the US-Mexico boundary, flowing into and throughout southern California, carrying with it nutrients and contaminants throughout the estuary. In recent decades, the flows have been heavily polluted with untreated sewage from the City of Tijuana. The wastewater enters the greater Tijuana River estuary, impacting coastal communities and disrupting the natural environment. In order to better understand these cross-border flows, researchers out of San Diego University sought to monitor the waterway test the capabilities of in-situ sensors to measure the contaminated water. Natalie Mladenov and Trent Biggs were two of the researchers involved in the project, deploying a real-time monitoring system in May of 2021.
Read More
