Extech RD300 Refrigerant Leakage Detector
The Extech RD300 measures leakage from air conditioning or cooling systems that use refrigerant.
Features
- Multi-colored LED light bar indicates the level of leaking refrigerant detected
- Bright LED convenience light located at the sensor tip illuminates dimly lit inspection areas
- Detects all standard refrigerants using a heated diode sensor
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
The Extech RD300 Leakage Detector is the ideal handheld meter to measure leakage from air conditioning or cooling units that use all standard refrigerants. A multi-colored LED light bar indicates the level of leaking refrigerant detected by the unit. The built-in, bright LED convenience ilght loacated at the tip of the sensor illuminates dimly lit inspection areas.
- Detectable Refrigerants: R‐22, R‐134a, R‐404a, R‐410a, and all CFCs, HCFCs and HFCs
- Sensor: Heated diode
- Sensitivity Levels: high 0.25oz/yr (7g/yr), medium 0.5oz/yr (14g/yr), low 0.99oz/yr (28g/yr)
- Warm-up Time: 90 seconds
- Auto Power Off: Automatic shut off after 10 minutes
- Low Battery Indication: LOW-BATT light switches ON
- Power Supply: 9V battery
- Battery Life: 13 hours of continuous use
- Operating Conditions: 0°C to 50°C (32°F to 122°F) <80%RH
- Storage Conditions: ‐10°C to 60°C (14°F to 140°F) <70%RH
- Flexible Probe Length: 450mm (18")
- Dimensions/Weight: 184 x 70 x 40 mm (7.2″ x 2.8″ x 1.6 ″)/ 280g (10.0 oz.)
- (1) Detector
- (1) Leak test bottle
- (1) 9V battery
- (1) Hard carrying case
Select Options
In The News
Lake Erie Volunteer Science Network: Building Trust in Citizen Science Programs
Citizen science programs have popped up across the United States, focusing on connecting local communities with nearby water resources and building a trustworthy data pool over the sampling period. While commonly utilized as a means of ensuring that large watersheds or lake regions are adequately sampled, the credibility and success of such programs have been called into question. [caption id="attachment_38996" align="alignnone" width="940"] HRWC volunteers measure stream velocity across a subsection of Woods Creek, a tributary of the Huron River near Belleville, Michigan. Stream velocity measurements can be combined with water level measurements to calculate stream flow and chemical parameter loads.
Read More
Monitoring Lake Erie’s Eastern Basin: Building Long-Term Data and Real-Time Public Solutions
In the eastern basin of Lake Erie, off the coast of Dunkirk, New York, a data buoy collects valuable water quality, weather, and wave data that inform residents and regulatory groups of conditions on the water. Since 2011, Buffalo State University’s Great Lakes Center has maintained and operated the Dunkirk buoy with funding from the Great Lakes Observing System (GLOS) and field support from the NYSDEC Lake Erie Fisheries Research Unit. [caption id="attachment_38976" align="aligncenter" width="940"] The Dunkirk Buoy viewed from the research vessel after being deployed in early spring.
Read More
SonTek CastAway-CTD Meter Review
Lightweight and easy to use, the SonTek CastAway offers a convenient 3-in-1 solution for measuring conductivity, temperature, and depth profiles. At a 5 Hz sampling rate, the CastAway is designed for up to 1 m/s free-fall through the water column. With fast response and accurate conductivity, temperature, and depth measurements, the CastAway is ideal for thermocline and halocline profiling. The unit also reports salinity and speed of sound. [caption id="attachment_38732" align="alignnone" width="940"] Environmental scientist, Katelyn Kubasky, holding the SonTek CastAway in front of the pond at the Fondriest Center for Environmental Studies.
Read More
