Global Water WQ600 ORP Sensor
Features
- Fully encapsulated electronics
- 4-20 mA output
- Stainless steel housing
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The Global Water WQ600 (Redox) ORP Sensor is a rugged and reliable ORP/Redox measuring device. The sensor is molded to 25' of marine grade cable, with lengths up to 500' available upon request. The WQ600’s output is 4-20 mA with a three-wire configuration. The unit’s electronics are completely encapsulated in marine-grade epoxy within a stainless steel housing.
Mechanics
As with all of Global Water’s 4-20 mA output sensors, users can add recording, control, and display capabilities to the WQ600. The GL500 Global Logger connects to the sensor’s 4-20 mA output to record data. The PC320 Process Controller connects to the sensor’s output to control pumps or alarms. The EZ100 Display adds visual monitoring capabilities to the ORP sensor.
| Output | 4-20 mA |
| Range |
-500 to +500mV |
| Accuracy | 2% of full scale |
| Maximum Pressure |
40 psi |
| Operating Voltage | 10-36 VDC |
|
Current Draw |
0.2 mA plus sensor output |
| Warm Up Time |
3 seconds minimum |
| Operating Temperature | -40 to +131°F (-40 to +55°C) |
| Size of Probe | 10-1/2" L x 1" Diameter (26.7 cm L x 2.5 cm Dia.) |
| Weight | 8 oz (227 g) |
Select Options
In The News
Climate Change and Microplastics: Monitoring Lake Champlain
Most people go to Lake Champlain for its exceptional views and thrilling boating, but it’s also home to a wide variety of interesting aquatic research projects. From studying microplastics to thermal dynamics of the lake, Timothy Mihuc, director of the Lake Champlain Research Institute (LCRI) at the State University of New York at Plattsburgh (SUNY Plattsburgh), has spent his career studying aquatic ecosystems. As an aquatic biologist, he’s the main investigator on Lake Champlain’s research studies while also managing their grants, employees, and their hands-on buoy work. Over the years, LCRI has received a number of environmental grants that aid in its monitoring research.
Read More
Current Monitoring after the Francis Scott Key Bridge Collapse
On March 26th, according to The Baltimore Sun , a 984-foot, 112,000-ton Dali lost propulsion and collided with a support column of the Francis Scott Key Bridge, collapsing the structure. Soon after the event, search and rescue, salvage crews, and other emergency responders were mobilized after the collision. As salvage efforts progressed in early April, NOAA’s Center for Operational Oceanographic Products and Services (CO-OPS) responded to a request for real-time tidal currents data and deployed a current monitoring buoy—CURBY (Currents Real-time BuoY)—into the Patapsco River north of the Francis Scott Key Bridge.
Read More
Soundscapes of the Solar Eclipse: Citizen Science Supporting National Research
On April 8, 2024, millions of people around the world had their eyes glued to the sky to witness a historic cosmic event. The total solar eclipse captured the headlines and the minds of many who became eager to gaze at the heavens as the sky went dark for a few minutes. However, not everyone used their sense of sight during the eclipse, some were listening to the sounds of the natural world around them as the light faded from above. The Eclipse Soundscape Project is a NASA-funded citizen science project that focuses on studying how the annular solar eclipse on October 14, 2023, and the April 8, 2024 total solar eclipse impacted life on Earth. The project revisits an initiative from the 1930s that showed animals and insects are affected by solar eclipses.
Read More
