KestrelMet 6000 Soil Sensor Array
Features
- Array consists of 3 probes, each on a 15' cable
- Can be easily added to any KestrelMet station with an M12 aux sensor cable
- Temperature sensors: +/- 0.2 C
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The KestrelMet 6000 Soil Sensor Array measures soil moisture and temperature while maximizing the accuracy of the Watermark readings as well as providing growers with additional insight. WATERMARK is the leading brand of Granular Matrix Sensor (GMS) and has been used worldwide for reliability and accuracy in measuring soil moisture. The KestrelMet soil sensor array can be easily added to any KestrelMet station with an M12 aux sensor cable.
Design
The soil sensor array consists of 3 probes, each on a 15’ cable. Each probe measures soil water tension using a Watermark sensor and soil temperature less than an inch above the Watermark sensor. Probes are typically buried at 3 different depths corresponding to the root zone of the target vegetation.
In The News
Lake Erie Volunteer Science Network: Building Trust in Citizen Science Programs
Citizen science programs have popped up across the United States, focusing on connecting local communities with nearby water resources and building a trustworthy data pool over the sampling period. While commonly utilized as a means of ensuring that large watersheds or lake regions are adequately sampled, the credibility and success of such programs have been called into question. 
 
[caption id="attachment_38996" align="alignnone" width="940"] HRWC volunteers measure stream velocity across a subsection of Woods Creek, a tributary of the Huron River near Belleville, Michigan. Stream velocity measurements can be combined with water level measurements to calculate stream flow and chemical parameter loads.
Read MoreMonitoring Lake Erie’s Eastern Basin: Building Long-Term Data and Real-Time Public Solutions
In the eastern basin of Lake Erie, off the coast of Dunkirk, New York, a data buoy collects valuable water quality, weather, and wave data that inform residents and regulatory groups of conditions on the water. 
 
Since 2011, Buffalo State University’s Great Lakes Center has maintained and operated the Dunkirk buoy with funding from the Great Lakes Observing System (GLOS) and field support from the NYSDEC Lake Erie Fisheries Research Unit. 
 
[caption id="attachment_38976" align="aligncenter" width="940"] The Dunkirk Buoy viewed from the research vessel after being deployed in early spring.
Read MoreSonTek CastAway-CTD Meter Review
Lightweight and easy to use, the SonTek CastAway offers a convenient 3-in-1 solution for measuring conductivity, temperature, and depth profiles. At a 5 Hz sampling rate, the CastAway is designed for up to 1 m/s free-fall through the water column. 
 
 With fast response and accurate conductivity, temperature, and depth measurements, the CastAway is ideal for thermocline and halocline profiling. The unit also reports salinity and speed of sound. 
 
[caption id="attachment_38732" align="alignnone" width="940"] Environmental scientist, Katelyn Kubasky, holding the SonTek CastAway in front of the pond at the Fondriest Center for Environmental Studies.
Read More