Vaisala HMP60 Humidity and Temperature Sensor

The Vaisala HMP60 humidity and temperature sensor is a simple and cost-effective sensor for remote data logging applications.

Features

  • Uses interchangeable Vaisala INTERCAP sensor
  • No recalibration needed after sensor replacement
  • M8 cable connector for integration with Vaisala or other compatible M8 series cables
$294.00
Stock 1AVAILABLE

Overview
The Vaisala HMP60 humidity and temperature sensor is cost-effective and straightforward, made for remote data logging applications. The Vaisala HMP60 has very low power consumption, making it ideal for battery-powered applications.

Relative Humidity
The sensor includes two voltage outputs for temperature and relative humidity in ranges of 0-1, 0-2.5, or 0-5 VDC. An M8 cable connection is available in 0.3m and 3m lengths. Alternatively, the sensor can be integrated with other compatible M8 series cables.

Durable
The sensor is designed for extreme conditions. The aluminum body is classified as IP65, and the sensor is protected by a membrane filter and a plastic grid. The INTERCAP sensor is interchangeable in the field - no recalibration is required.

Questions & Answers
No Questions
Did you find what you were looking for?

Select Options

  Products 0 Item Selected
Image
Part #
Description
Price
Stock
Quantity
Vaisala HMP60 Humidity and Temperature Sensor
HMP60M00A0A1B0
HMP60 humidity and temperature sensor, RS-485 Modbus output
$294.00
1 Available
  Accessories 0 Item Selected
Notice: At least 1 product is not available to purchase online
×
Multiple Products

have been added to your cart

There are items in your cart.

Cart Subtotal: $xxx.xx

Go to Checkout

In The News

Cal Poly, San Luis Obispo Manages Monitoring Efforts in Morro Bay

California Polytechnic State University, San Luis Obispo (Cal Poly, SLO), has been monitoring Morro Bay for decades, and while the monitoring program has changed over the years, the dedication to monitoring the bay has remained the same. The project started in 2006 as a Packard Foundation-funded initiative to monitor water quality flowing in and out of Morro Bay. The goal at the time was to use the data collected to develop and inform an ecosystem-based management plan in collaboration with the Morro Bay National Estuary Program (MBNEP). Since the estuary was the focus at the time, researchers were monitoring water flowing into the estuary from Chorro Creek and Los Osos Creek.

Read More

Green Water in Green Bay: Using Data Buoys to Monitor the Southern Bay

While the bay of Green Bay has been referred to as the largest freshwater “estuary” in the world, the watershed hosts intensive agriculture and contributes one-third of Lake Michigan’s total phosphorus load.  The Fox River flows into the bay, carrying excess nutrients largely the result of non-point source runoff from the watershed. With a history of deterioration extending well into the last century, the bay ecosystem suffered significant declines in water quality.  This, in turn, stimulated major clean-up and ongoing restoration efforts to improve water quality. Tracking these changes is an important aspect of ecosystem management.

Read More

Cross-Border Sewage Contaminated Flows: Monitoring the Tijuana River

The Tijuana River runs across the US-Mexico boundary, flowing into and throughout southern California, carrying with it nutrients and contaminants throughout the estuary. In recent decades, the flows have been heavily polluted with untreated sewage from the City of Tijuana. The wastewater enters the greater Tijuana River estuary, impacting coastal communities and disrupting the natural environment. In order to better understand these cross-border flows, researchers out of San Diego University sought to monitor the waterway test the capabilities of in-situ sensors to measure the contaminated water. Natalie Mladenov and Trent Biggs were two of the researchers involved in the project, deploying a real-time monitoring system in May of 2021.

Read More