YOUNG Electronic Compass
Features
- Electronic compass designed for use with YOUNG wind monitors
- Digital signal is more resistant to electrical interference and errors from line losses
- Each model is supplied in a weather-resistant enclosure
- Free ground shipping
- Expedited repair and warranty service
- Lifetime technical support
- More
Overview
The YOUNG 32500 Electronic Compass utilizes a solid state compass module for accurate magnetic heading data. The compass module is combined with high-resolution interface circuitry to generate useful "true" wind data from the wind sensor. Auxiliary sensor inputs allow the connection of other meteorological sensors, such as temperature, humidity and barometric pressure sensors.
Mechanics
All analog signals are converted to serial format for clear transmission. The serial interface greatly simplifies the connection of meteorological sensors to recording electronics with serial inputs. By transmitting the signal in serial form, sensor data can be carried over great distances using a minimum number of conductors. The digital signal is more resistant to electrical interference and errors from line losses. The YOUNG 32500 Electronic Compass is supplied in a weather-resistant enclosure and comes with a mounting adapter to fit on the same vertical mast as RM Young wind sensors.
- Size: 4.75" (12cm) H x 2.87" (7.3cm) W x 2.12" (5.3cm) D
- Resolution: 1 degree azimuth
- Accuracy: +/-2 degrees RMS
- Inputs: YOUNG wind sensors 2 channels, 0-1000 mV 2 channels, 0-5000 mV
- Outputs: Serial RS232/RS485
- Selectable formats: ASCII Text, NMEA, RMYT compatible with 06201 display
- Operating Temperature: -50 C to +50 C
- Power: 10 to 30 VDC, 30 mA
- Mounting: 1" IPS (1.34" actual diameter)
- Other: Self calibration mode for compass
In The News
UNC's industry-standard water quality profiling platforms get upgrade
The University of North Carolina Institute Of Marine Sciences has a history with profiling platforms. UNC engineers and scientists have been building the research floaters for 10 years in a lab run by in Rick Luettich, director of the institute. 
 UNC scientists and engineers developed their own autonomous vertical profilers to take water quality readings throughout the water column. They have three profilers placed in the New and Neuse rivers. The profilers are designed to drop a payload of sensors to an allotted depth at set time intervals. Instruments attached take readings continuously on the way down and up. 
 Data collected by the profilers has been used to study water related issues such as infectious disease and sediment suspension.
Read MoreUSGS weather station network monitors Arctic Alaska's climate
When the U.S. Geological Survey began building their climate and permafrost monitoring network in Arctic Alaska in 1998, there wasn't much precedent for how to build the infrastructure for the instruments in the region's unforgiving environment. 
 
That meant the scientists had to learn the particulars on the fly. For example: On the great expanse of flat, barren tundra, a weather station sticks out like a sore thumb to a curious grizzly bear. 
 
"The initial stations were pretty fragile," said Frank Urban, a geologist with the USGS Geosciences and Environmental Change Science Center. "So the bear and those stations--the bear won every single time without any problem.
Read MoreMonitoring OAE Efforts in Halifax: Fighting Climate Change with Emerging mCDR Strategies
Marine carbon dioxide (CO 2 ) removal (mCDR) is an emerging strategy that aims to fight climate change by taking advantage of the carbon capture potential of our oceans. There are multiple types of mCDR approaches being evaluated globally, one of which is ocean alkalinity enhancement (OAE). 
 
 According to NOAA , OAE aims to increase the pH of water by either adding alkaline material to ocean surface waters or by removing acid from seawater. Due to the change in acidity, the chemistry of seawater changes, making it capable of absorbing greater volumes of CO 2 .
Read More